:	May 24, 2004

.

Remove the instrument panel center reinforcement.

.

Remove the PAD switch.

.

Remove the glove compartment.

.

Remove the closing trim panel.   Release the clip.   Remove the 2 screws.   Disconnect the electrical connector.

.

Remove the passenger side footwell duct.   Remove the clip.

.

Remove the stowage compartment tray.   Release the 4 clips.

.

Remove the instrument panel passenger side reinforcement.   Remove the 11 Torx screws.   Disconnect the electrical connector.

.

:   Do not disassemble further if the component is removed for access only. Remove the glove compartment lamp.

.

Remove the glove compartment damper.   Remove the Torx screw.

.

:   Note the position of the hinge pin and spring prior to removal. Remove the stowage compartment lid.   Remove the 2 hinge pins.   Release the 2 hinge springs.   Remove the Torx screw and remove the damper.

.

Remove the glove and stowage compartment strikers.   Remove the 4 Torx screws.

.

Install the glove compartment damper.   Tighten the Torx screw.

.

Install the stowage compartment lid.   Install the damper and tighten the Torx screw.   Attach the hinge springs.   Install the hinge springs.

.

Install the glove and stowage compartment strikers.   Tighten the screws.

.

Install the glove compartment lamp.

.

Install the instrument panel passenger side reinforcement.   Connect the electrical connector.   Tighten the Torx screws.

.

Install the passenger side footwell duct.   Install the clip.

.

Install the closing trim panel.   Connect the electrical connector.   Secure the clip.

.

Install the stowage compartment tray.   Secure the clips.

.

Install the glove compartment.

.

Install the PAD switch.

.

Install the instrument panel center reinforcement.